Halloween quick fix :: goggling eyeballs

To be honest - Halloween hasn't really been on top of my priority list. It used to be our favorite event of the year. We'd put days (weeks) of preparation in it. But not anymore. A lack of exposure, I guess, ...

Anyway, there must be something left, though, as I came up with this - true: totally miminimalist - craft yesterday. I can't remember what triggered it. Was it one of the girls rolling their eyes when being told to clean up their rooms?  Or was it my recent encounter with eye doctors, laser beams and dilated pupils. Not sure...




This craft is easy, fast, totally silly and totally last minute. All you need is two (wooden) beads (varnished/ glossy works best to get the real eyeball look), a piece of fat string, and permanent markers.



Slip the beads onto the string, tie a (double) knot on both ends and slip the beads over the knot to hide it (use a dab of glue if you're worried about losing an eye), cut off excess string and finally draw the eyes, with scary pupils, lots of bloody veins, ... Slip the eyeballs between your fingers and scare the crap out of everyone! For a better effect, you might actually want to use some face paint on your hand to make it look like a really scary face. Use your imagination!
Note: Due to choking hazard this item is not intended for young children.

Wishing you a happy and safe Halloween, everyone!

Cheers,

Pascale

Colorful four strand round braid bracelets :: DIY

It's Fall. That's what the calendar says.

And even though it's probably about time to shed those summer bracelets, today, I'm going to show you some bracelets we've enjoyed making and wearing this Summer: four strand round braided bracelets.
You're probably familiar with the leather version of these bracelets - and that's actually how I got started. But one night I ran out of leather lace and I decided to give it a try with Scoobie Doo strands - to much approval from my girls the next morning.

Colorful, simple to make once you've got the hang of it, and very low cost.
So, if you want to hold on to that summer feeling for just a tiny bit longer, I recommend making a couple of these...





You will need: Scoobie Doo strands, 2 per bracelet.

Summarized and labeling each strand from left to right with a letter (A, B, C and D) the process boils down to the  repetition of the following 4 steps:

Repeat these four steps until the braid is long enough to fit around your wrist (or ankle). To lock the braid, tie a knot with one strand around the other three. 

To tie around your wrist pull two strands through the loop and tie in a knot with the other two!If the pictures aren't clear enough, I found this video tutorial to be very instructive and easy to follow. I use two strands folded in half instead of four, making sure to leave a loop at the top.

Note: in the pictures I taped the braid down. However, there is no need to do that - I did so because I needed to make a 'snapshot' of every step. It's much easier if you hold the braid between your fingers just like you do when braiding hair, for instance.

Purses

A few more purses I made over Summer.

Just the right size to hold a phone, keys and some money.

Instructions can be found here.

Note: The dimensions of the purses above correspond to the ones given in the instructions - the bag in the previous post was made slightly bigger.

I built a bag

Inspired by the famous and oh-so-gorgeous Building Block Bags and with the help of this tutorial.
This is the second one I made - I made this one slightly bigger than the first one.

One for every occasion...

T-shirt yarn macramé puppets

Sitting on a mountain of old T-shirts?
Bought some T-shirt yarn but never got around crocheting or knitting that rug?
Or did you make that rug but you still have yarn left?
Here's a fun craft making use of T-shirt yarn.

These T-shirt yarn puppets were part of our school's Spring fair activities last June and I can immediately add that they were a big hit among all ages.
It's a nice introduction to macramé as well.
If you don't have T-shirt yarn you can cut your own from old T-shirts (you can find how to do this online). Or you could use fabric strips, bias tape, cord, ribbon, ...

Slip the puppets on a key chain, use them to personalize school bags or make a bunch to make a cute mobile or garland for the nursery.

Recommended age: 5+
Required skills: ability to tie a knot
Click here to download written instructions.



Note: inspiration for this craft was found here. Just now, I also found this tutorial online.

As with all of my tutorials, please note, this tutorial is intended for personal use only. Therefore, do not reproduce, sell or commercialize in any form. Thanks for understanding!

If you made something using a tutorial found on this blog or if you got inspired by something you found here, make sure to post your pictures here.

Triangle open back shirt

Things are a bit slow around here but we're fine, enjoying our summer.
And summer it is! Man, it's been hot around here - I can't remember it being this hot!
Luckily, we were able to spend a few days away at the beach:
- reading (I finally finished Gone Girl by Gillian Flynn - a disappointing read),
- making bracelets,
- swimming,
- sipping cool home made hibiscus & cranberry juice tea (so good!!)
- making a lovely little purse (more about that later)
- and crafting this shirt for M.
She'd seen a similar one, ridiculously expensive, at a boutique here in Paris. We both agreed this was something we could easily whip together ourselves!
The result you see below - she's been wearing it like this or over a tank top in a contrasting color.
Both are equally nice.

So, grab those scissors!!

Simple leather bag tutorial

I just finished another leather bag this afternoon and I love it.
As a matter of fact, I just put it to the test and I find it perfect - very basic - very simple - just the way I like it.
And you know what?!
The instructions are down below, so you can make one too!
This is an entry level project, so no special skills, nor tools are required.

Here's what you will need:

The dimensions of the finished bag are: 38 cm by 40 cm

- leather - I used a leather hide of approx. 0.55 m² but any large (combined) piece of leather would do
- leather cording for strap (determine how long you want your straps to be, and add an extra 15 cm to each strap for knotting - so, if one strap measures x you will need 2(x + 15 cm) in total.
- thread, linen or nylon, as long as it's strong
- magnetic snap
- 2 needles
- pricking iron or a stitching awl
- mallet, rubber or wooden hammer
- hole punch
- glue, a standard crafts glue is fine
- optional: beeswax to wax sewing thread




Instructions:

1. Cut a rectangle (or two rectangles of equal size if working with smaller pieces of leather) - in my case the rectangle was 39 cm x 80 cm. Next, make stitching holes along the long side for the side seams using a pricking iron, stitch punch or awl, about 0.5 cm from the side.
2. Cut a piece of thread about 5 times the length of the seam you're going to sew. Thread a needle at each end and 'lock the needles' as is very well explained here. Next, sew the side seams using a saddle stitch, explained here. Note: in most stitching videos you'll notice people are using a stitching pony. I don't, for the simple reason I don't own one and I don't find it necessary. However, you could squeeze your leather in between two hardcover books held together with a a rubber band or belt. This should work equally well in my opinion.
3. From the left over leather, cut six 5 cm squares.  Put four aside. Attach male and female part of a magnetic snap to the two remaining squares. If you don't know how to fix a magnetic snap check out this tutorial. Next, generously apply glue to the back of the magnetic snap squares and glue them into place onto the wrong sides of the bag, perfectly in the middle and about 3.5 cm from the top (measuring from the center of the snap). To make sure the glue/ square adheres, lightly hammer the square. Dab away any excess glue. Let dry.
4. Determine where you want the straps to come. Then, position and glue  into place each of the four other squares which will serve to reinforce the leather where the strap holes come. Hammer lightly, dab away excess glue and let dry. 
5. Mark the center of each square. Next, punch a hole with the leather punch. Repeat for the other squares. 
6. Cut the leather cord to size, to make two straps. Tie a  double fisherman's knot at one end, thread through the hole as shown, thread through the other hole and finish off with another double fisherman's knot. Repeat with the second strap. And that's it!

As with all of my tutorials, please note, this tutorial is intended for personal use only. Therefore, do not reproduce, sell or commercialize in any form. Thanks for understanding!

If you made something using a tutorial found on this blog or if you got inspired by something you found here, make sure to post your pictures here.